Cart  

No products

Free shipping starts at $300 ex GST.

$0.00 Shipping
$0.00 GST Tax
$0.00 Total

Cart Check out

Fire Retardant Liquid NF

$148.00


Downloads

For instruction on the correct use of this product please refer to the product label in the Download section.

Cyndan Fire Retardant Liquid NF is a clear penetrating fire-retardant solution used for treatment on all softwood timbers. It inhibits the spread of fire once the source of fire is removed. CSIRO testing confirms it satisfied the requirement for bushfire-resisting timber specified in AS 3959:2009 Construction of Buildings in bushfire prone area Appendix F F1 and F2(a) making it a BAL 29 level Fire Retardant Solution.

For larger quantities please contact our office.

More details

    • Innovative passive fire retardant
    • Inhibits the spread of fire once the source of fire is removed
    • Single component treatment for all softwood timbers
    • Bushfire resistant timber that withstands exposure up to a BAL-29 condition

Cyndan Fire Retardant Liquid NF is an innovative chemical breakthrough in fire prevention. In the quest to provide the Australian building industry with the latest products, to protect timber from the threat of fire, Fire Retardant Liquid NF was developed. This product is the result of three years extensive research. When tested by the CSIRO (as per their Certificate on our website) rediata pine samples which were treated with Fire Retardant Liquid NF satisfied the requirement for bushfire-resisting timber specified in AS 3959:2009 Construction of Buildings in bushfire prone area Appendix F F1 and F2(a).

As per clause F1 of Appendix F, this means timber coated with Fire Retardant Liquid NF will be deemed to be acceptable to withstand exposure up to a BAL-29 condition.

The CSIRO testing was not subjected to the weathering procedure of ASTM D2898 Method B as specified by Appendix F F2(b) of AS 3959. At the discretion of the regulatory authority this material may be approved for use in situations where it is protected from the weather as referred to in Appendix F F2(b) of AS3959. This refers to the timbers being covered by a roof protection (or similar) at 30 degrees or greater to the vertical and they are well detailed and maintained (i.e. painted or stained after the Fire Retardant Liquid NF is first applied to the timbers) and kept well ventilated.

Cyndan Fire Retardant Liquid NF is a single component treatment that inhibits the spread of fire in its initial stage by isolating the combustible materials from the flames. A minimum of 2 coats required. Product can be stained and sealed with either Water or Oil based treatments.

SPECIFICATIONS:

  • Specific gravity: 1.15
  • Solids by volume: 33%
  • Fungus resistance: excellent
  • Application: brush, roller, spray
  • Application rate: 6-9m2 per Litre min. 2 coats
  • UV Resistance: good
  • Toxicity: non toxic
  • Flashpoint: non flammable
  • Colour: green
  • Finish: clear

MASTER TOUCH Specialty Applicators

  • Safety Data Sheet: Refer to the SDS before handling this product.
  • Storage: Store in the closed, original container in a cool, dry and well-ventilated place out of reach of children. | Do not store in direct sunlight.
  • Disposal: Containers must be thoroughly rinsed and dried before disposal. | Dispose of in accordance with your local government regulations - if in doubt return empty container to the manufacture. | Empty containers and product should not be burnt.
  • Safe Use - AMBER Code: Please use caution as per safe use and storage guidelines. Goods might be classified as Dangerous Goods. However, Amber items are safer to use as a result of replacing harmful ingredients with safer alternatives than what you find in Red Coded products.
  • Part of the Cyndan GREEN SOLUTIONS Range: Reduces timber structure fires by isolating the combustible materials from the flames.
Product added in cart.

News